1996 38 Stolper Express - Wet Mill - Profile
1996 Stolper
38' (11.58m) 38 Express - Wet Mill
For Sale
- Venice Florida United States
- Sport Fishing
- Power
- Used
- Diesel
- Fiberglass Hull
- HIN/IMO: FLD37012H596
- Stock #: BRA2112-CC
FEATURES: |
---|
Garmin 8212 (July 2021) |
Furuno Navnet VX2 plotter/GPS |
Recent refit |
Pressurized fresh-water system |
Date Listed: 11/08/2021 |
$ 289,000 USD
€ 271,487 Euros
$ 397,772 CAD
£ 232,482 GBP
Description
1996 Stolper 38 Express Sportfish Wet-Mil was designed with the serious fisherman in mind. At 27 knot cruise and only 25gph, this 38 Stolper has not only speed but efficiency as well. The open bridge deck and center helm gives 360 degrees of an unobstructed view whether fishing and/or cruising. With its present owners providing an open check book maintenance plan and annual updates along with refits, one will be challenged to find another 30-40 foot express quite like this.
Data Sheet
HIN/IMO: FLD37012H596
Official Number: 1041161
Stock # BRA2112-CC
LOA: 38' " (11.58 Meters)
Type: Power - Used
Year: 1996
Beam: 12' 5"
Maximum Speed: 35 Knots
Cruise Speed: 27 Knots
Fuel Type: Diesel
Hull Material: Fiberglass
Fuel Tank: 400 Gallons (1514.16 Liters)
Fresh Water: 60 Gallons (227.12 Liters)
Holding Tank: 20 Gallons (75.71 Liters)
Photos click to view all
Multimedia
Engines
Engine 1
- Engine Make: Cummins
- Engine Model: 6CTA 8.30
- Engine Type: Inboard
- Power HP: 420.00
- Fuel Type: Diesel
- Hours: 2900.00
- Engine Location: Port
Engine 2
- Engine Make: Cummins
- Engine Model: 6CTA 8.30
- Engine Type: Inboard
- Power HP: 420.00
- Fuel Type: Diesel
- Hours: 2900.00
- Engine Location: Starboard
Full Details
Accommodations
- Dinette seating hi-low table
- Berth for two guests
- Hanging locker and drawers
- Overhead lighting
- Head with separate shower
- Rod racks on cabin ceiling
- TV w/ DVD player
- Teak cabin floor
- Corion counter tops w/stainless sink
- A/C 16000BTU
- Galley Equipment
- Refrigerator
- Pressurized fresh-water system
- Hot water heater
- Microwave
- Ample storage space
Navigation Systems
- Garmin 8212 (July 2021)
- Furuno Navnet VX2 plotter/GPS
- Furuno radar 48-mile radar open array
- Furuno Navnet VX2 in tower
- Furuno auto pilot bridge and tower
- ICOM M502 bridge and tower
- 2 VHF antennas
- Fusion stereo with satellite
Deck and Hull Equipment
- Complete bottom job with new prop speed, removed and re-bedded all through hulls, replaced all zincs. (March 2021)
- Teak Rocket Launcher with 6 rocket launchers installed with fishing protective cover (March 2020)
- Engine room floor (Awlgrip) painted (March 2020) Installed Plasdeck flooring on cockpit sole and bridge deck floor (March 2019)
- Sea deck, bridge deck, hard top, and tower flooring (2018)
- Soft goods replaced bridge deck and tower (2018)
- Custom Above deck live well (2018)
- Complete exterior paint (Awlgrip) hull, topside, non-skid, blast bottom, re-fair, sand and apply two coat epoxy barrier coat (February 2017)
- Bridge deck EZ2CY glass, cockpit, fly and bridge deck mooring cover (February 2017)
- Clear cote tower (2017)
- Rigging station
- In-floor live well
- In floor Fish box
- Tackle station
- 12 rocket launchers on tower
Mechanical Equipment
- Port and starboard injection pumps removed and sent to Everglades in Ft Lauderdale. Complete re-build along with all injectors removed and rebuilt (October 2021)
- Install new compass (September 2021)
- Complete engine, gen set and transmission service (July 2021)
- Replace AGM batteries (April 2021)
- Replace all bilge pumps (April 2021)
- Both engines 1000 hour service completed on main engines and generator set including all new hoses on generator, removed all coolers which were cleaned, pressure tested and re-sealed. Replaced all coolant with extended life remove and replaced raw water impellers, all components sandblasted, primed and repainted (March 2021)
- Saltwater wash down pump (March 2020)
- Replace 120V main line to breaker (March 2020)
- Replace U-joints (June 2019)
- Install new power assisted hydraulic steering bridge and tower (Hi-Drive system) (March 2019)
- Install Reverso oil change pump (2019)
- Install Glendenning electric control system with single lever controls (August 2018)
- Replace shafts and wheels (Veem Conquest) (July 2018)
- Replace fuel cooler (February 2018)
- In frame rebuild starboard main engine (February 2018) @ 1793hrs
- Engine room LED lights (2018)
- Twin Disc transmissions 1.5:1 new 2006 port (2017) with new torsional coupling starboard transmission (2017)
- Install turbos both engines (July 2017)
- Engine alarms
- Racor fuel filters
- Raw water sea chest
- A/C (2017)
- Trim tabs
- 5KW Norpro gen set (2006)